|
|
Features
- Plug-and-Play
- Quick and Easy to Install
- Very Compact and Easy to Use
- Low Power Consumption
- Capable of Running Script Command
- Programmable, Teachable or Manual Control
- Different Modes of Operation:
- Stand-alone, No PC Required to Operate
- Host Controlled, PLC, C/C++, Python, Visual Basic, LabVIEW™
- Joystick / Trackball Controlled
-
Built-in Self Test
-
Evaluation
Unit Is Available upon Request
|
|
Software
-
Easy System Setup and Evaluation
-
Menu Driven
-
Free Software
Included
Dedicated Inputs
- Positive and Negative Limit Switches per Axis
- Home Switch per Axis
- External Step and Direction Input Signals per Axis
Dedicated Outputs
- Step, Direction, and Driver Enable Outputs
Status LED Output
General Purpose Digital Input / Output
-
Optional
8 TTL / CMOS Inputs Inputs
-
Optional
8 TTL / CMOS Outputs
- Optional 4 PWM outputs
-
Optional
4 Quadrature Input Signals
General Purpose Analog Input
- 4 Inputs
- 10 Bits of Resolution
Communication Interface
- RS-232 Interface
- Optional USB Interface
|
|
The stepper
motor control card is an
easy-to-use, plug-and-play
and
cost effective
solution for single and multi-axis
motion control applications.
It may be used as a stand-alone unit or may be commanded by an external device.
This series supports up to 4 axes of motion, 8 TTL / CMOS compatible
inputs, 8 TTL / CMOS compatible outputs, 3 analog inputs, and up to five
optical encoder inputs. The command port is provided for stand-alone
operation.
The
powerful programming instructions with more than 120 commands include
motion control, system configuration, data flow, program flow commands,
32-bit logical and mathematical operations, and other miscellaneous
instructions.
This card can also be operated using an analog joystick or a trackball
with quadrature outputs.
The speed of the motor is proportional to the tilt angle of the joystick
or the rotational speed of the trackball. The
joystick
has three
speed selection keys; fast, medium and slow speed.
The card may
be controlled in different ways;
1)
Stand-alone Operation of Stepper Motor Control Card
(Stored Program - Optional)
In this mode, the controller does not need an
external device such as a PC to operate. The
controller is programmed in a simple programming
language. The code is developed, downloaded to the
controller, run and saved in the controller's
non-volatile memory using the supplied Integrated
Development Environment (IDE) software.
2)
Externally Control Operation of Stepper Motor
Control Card
In this mode, the external host such as a PC,
micro-controller or PLC sends a series of commands
to the controller via the RS-232 serial port. The
controller processes and performs the incoming
commands and responds with proper messages.
3)
Operating the Stepper Motor Control Card Using the
Supplied Control Panel
The supplied user friendly Control Panel software
allows the user to set-up the module quickly. The
operator is able to move the mechanism to
different positions by pressing the corresponding
buttons of the Control Panel or by using the
joystick and/or trackball.
4)
Operator Interface Terminal
The terminal allows the user to operate the
controller without needing an PC, PLC or host
controller. The user friendly interface design
allows the user to enter the motion parameters and
make the move.
|
More Info...
|
