Automated CD/DVD
Disc Polishing Machine
Video
(6.9 MB, 2
Minutes, Requires
Quick Time Player)
|
A year after
integrating the Allegro controller into the disc polishing
machine, the results have been impressive. The Allegro
controller has
been one of the most dependable components, performing
flawlessly
through the polishing of tens of thousands of discs. We now
have the
Allegro designed in to our production machines.
SGM Design Labs LLC
|
|
Fiber Glass
Wrapping Machine
Video
(9.5 MB, 30 Seconds, Requires Windows Media Player)
|
At TubeX we did
have some ideas of CNC-winding a fiber glass around our mufflers
inner core's.
For this daring project we searched for a control-, drive-system
which was not too expensive, as that the outcome could be a
total failure. At Optimal Engineering Systems, Inc. Systems we
found the ALLEGRA control-, drive system we were looking for.
We did successfully complete the project, and can say that the
system runs more than twice as fast as set out for. In general
it's a small and very dynamic lathe where we wind a fiber glass
from a reel onto an inner core.
We are very satisfied with their pre- and after-sales and
services.
Actually we are
that satisfied that we ordered a second system for upgrading a
conventional profile bender into a CNC profile bender.
Mr. Jos Hummelink
Owner
|
|
Laser Repair System
|
Your service to
customer excellent like the system we bought, three are working
good, reliable, low cost, I am very satisfy with your product.
Mr. Long Tran
VP of Engineering
|
| |
We use the OES
3-axis programmable motion control system to control a
customized microscope stage designed to hold 200 mm diameter
semiconductor wafers. The stage is controlled either with the
OES joystick or programmable with function Click to Get a Quotes
through the RS232 interface.
Dr. Jim T.
|
| |
We need to transfer
wafer in a ultrahigh vacuum chamber from one to another. Space
and precision are what we care about.
We need an automatic system to accomplish this task, in which
case two stepper motors are needed. One is for linear motion of
the transfer arm, the other for rotation of the arm.
The service from the company is good, as well as the quality of
the products.
Mr. Hongtao S.
|
| |
We have used the
2-axis programmable motion control system from OES for our
research project. The project was to build a sun simulator.
We wanted to
simulate the motion of sun around the earth for a particular
day, time and location. This is used for the real time
verification of Building Integrated PhotoVoltaic System
simulated on computer using software packages.
Optimal
Engineering Systems, Inc. Systems has a very good customer
support and their guidance throughout the project duration is
appreciable.
Ms. Shveta K.
Ms. Vanessa T.
Ms. Mary R.
|
