|
| |
Closed Loop Solenoid Process Control Module
|
|
|
Features
-
Low Cost Position Control
- Small Size
- Low Weight
- High Efficiency
- Microcomputer Based
- Very High Reliability
- Pulse Width Modulated (PWM)
- Single Supply, from +9 VDC to +50 VDC
- High Supply Voltage, +50 VDC
- High Output Current 15 Amps Peak, 4 Amps RMS
-
Incorporates Flyback (Snubber,
Freewheeling)
Diode per Output Device
-
Available with High
Side Driver
- QUANTITIES AVAILABLE IN STOCK
|
|
Typical
Applications
- Solenoids
- Valves
- Actuators
- Voice Coil Actuators
- Hydraulics
|
|
Command Source
-
Encoder Following
-
0 to +5
V or +10 V Analog
-
Step and Direction
-
4 to 20 milliamps Current
Feedback
Supported
- Supply Voltage, +9 to +50 VDC
- Peak Current, 15 Amp
- Average Current, 4 Amp
-
0-5 VDC Input Signal
-
0-10 VDC Input Signal
-
4-20 milliamps Input Signal
- Step and Direction Input Signals
- Quadrature Input Signals
-
External Potentiometer
-
Onboard Potentiometer
- Serially Controlled
|
|
|
This module offers a very low cost solution for limited angle / stroke
position control.
The Closed Loop Solenoid Position Control Module is designed to
control the position of a solenoid plunger / shaft, voice coil
motor or similar
devices. Since the solenoid moves only in one direction, a return force
generated by another component is required. This could be a
spring loaded solenoid
,
another solenoid positioned in the opposite direction or hydraulic
force.
The PID controller is easily adjusted using the onboard
potentiometers.
A
DIN-rail mount bracket is
available for this product.
|
|
Performance Specifications
|
Parameter
|
Min
|
Typical
|
Max
|
Units
|
|
Supply Voltage
|
9
|
|
50
|
VDC
|
|
Peak Current
|
|
|
15
|
A
|
|
Average Current
|
|
|
4
|
A
|
|
Input Control
- Voltage Controlled
|
0
|
|
5
|
VDC
|
|
Input Control
- Current Controlled
|
4
|
|
20
|
mA
|
|
Operating Temperature
|
0
|
|
50
|
Deg C
|
|
Mechanical Specifications
|
|
Mounting Pattern
|
Four 6-32 Screws, 0.15" Diameter (3.8 mm)
|
|
Dimensions
|
3.00” W, 3.00” D, 0.85” H (76.2 mm, 76.2 mm, 21.5 mm)
|
|
|
Ordering Information
|
|
|
|
|
|
Part No.
|
Description
|
Amount
|
|
CLSP-01
|
Single-device Closed Loop Solenoid Position Control Module, 0-5
VDC Input Signals, +50
VDC Version, Low Side Driver
|
Click to Get a Quote
|
|
CLSP-02
|
Single-device Closed Loop Solenoid Position Control Module, 0-10
VDC Input Signals, +50
VDC Version, Low Side Driver
|
Click to Get a Quote
|
|
CLSP-03
|
Single
-device
Closed Loop
Solenoid
Position Control Module, 4-20 milliamps Input Signal,
+50 VDC Version
, Low Side Driver
|
Click to Get a Quote
|
|
