Stored Program Motion Control System
Any Combination of Stepper and Servo Motors,
ALLEGRA Series
|
|
|
|
|
|
Features
- Plug-and-Play
- Quick and Easy to Install
- Very Compact and Easy to Use
- Low Power Consumption, High Torque Motors, High Speed
Capability
- Easy Programming Language, No Compiler or Assembler
Required
- Programmable, Manual Control
- Different Modes of Operation:
- Host Controlled, PLC, C/C++, Python, Visual Basic, LabVIEW™,
MATLAB™
- Joystick / Trackball Controlled
- Optional Quadrature Encoder Feedback
- Optional Joystick / Trackball Interface
- Optional LIMIT switches
- Optional Discrete Inputs and Outputs
-
Built-in Self Test
- Available to Drive Stepper, DC Servo, Brushless, and
Voice Coil Motors
Totally Integrated Solution
Available in 19 inch Rack Mount Enclosure
Evaluation
Unit Is Available upon Request
|
|
Software
-
Easy System Setup and Evaluation
-
Menu Driven
-
Free Software
Included
Stepper Motor
Driver
- Up to 7 Amp Phase Current
- +12 VDC to +80 VDC
- 2 to 256 Micro-steps per Step Resolution
- Size 8 to 42 Motors
- Auto Current Reduction
DC and Three Phase Brushless
Motor Driver
-
Up to 40 Amps Phase
Current
-
+18 VDC to +80 VDC
Communication Interface
- RS-232 Interface
- Optional
Ethernet
Interface
- Optional USB
Interface
Supply Voltage
|
|
|
|
The ALLEGRA series of Stepper Motor control system is an easy-to-use, plug-and-play and
cost effective solution for
Stepper Motor control applications.
It may be used as a stand-alone unit or may be commanded by an
external device.
Each system
includes
the power supplies, the motion controller card,
the
micro-stepper and/or servo motor drivers
.
This
Motor control system supports up to 4 axes of motion,
optional 8 inputs,
optional
8 outputs,
optional
analog
inputs, and optional optical encoder inputs.
The system
may be controlled in different ways;
1
)
Stand-alone Operation of Motor Control System
In this mode, the controller does not need an
external device such as a PC to operate. The
controller is programmed in a simple programming
language. The code is developed, downloaded to the
controller, run and saved in the controller's
non-volatile memory using the supplied Integrated
Development Environment (IDE) software.
2)
Externally Control Operation of
Motor Control System
In this mode, the external host such as a PC,
micro-controller or PLC sends a series of commands
to the controller via the RS-232 serial port. The
controller processes and performs the incoming
commands and responds with proper messages.
|
The system can also be operated using an
analog joystick or a trackball.
The
speed of the motor is proportional to the tilt angle of the joystick
or the rotational
speed of the trackball.
More Info...
|
Ordering Information
|
Part No.
|
Description
|
Amount
|
|
ALLEGRA-1-STPR-01
|
Plug-and-Play
Single-axis
Programmable Stepper Motor Control System
|
Click to Get a Quote
|
|
ALLEGRA-2
-STPR-01
|
Plug-and-Play
Two-axis
Programmable Stepper Motor Control System
|
Click to Get a Quote
|
|
ALLEGRA-3
-STPR-01
|
Plug-and-Play
Three-axis
Programmable Stepper Motor Control System
|
Click to Get a Quote
|
|
ALLEGRA-4
-STPR-01
|
Plug-and-Play
Four-axis
Programmable Stepper Motor Control System
|
Click to Get a Quote
|
This series is suitable for two-phase stepper
motors.
Power Supply:
Input Power; 115 or 230 VAC, 50 – 60 Hz
|
|
Part No.
|
Description
|
Amount
|
|
ALLEGRA-1-SRVO-01 |
Plug-and-Play
Single-axis
Programmable DC
Servo
Motor Control System
|
Click to Get a Quote
|
|
ALLEGRA-2-SRVO-01 |
Plug-and-Play
Two-axis
Programmable DC Servo Motor Control System
|
Click to Get a Quote
|
|
ALLEGRA-3-SRVO-01 |
Plug-and-Play
Three-axis
Programmable DC Servo Motor Control System
|
Click to Get a Quote
|
|
ALLEGRA-4-SRVO-01 |
Plug-and-Play
Four-axis
Programmable DC Servo Motor Control System
|
Click to Get a Quote
|
TThis series is suitable for
DC Servo Motor with Quadrature Incremental Optical Encoders with quadrature incremental optical encoder.
Servo Motor Drivers:
Up to
4.0 Amps Phase Current
Power Supply:
Input Power; 115 or 230 VAC, 50 – 60 Hz
|
|
Part No.
|
Description
|
Amount
|
|
ALLEGRA-1-BLDC-01 |
Plug-and-Play
Single-axis
Programmable Brushless DC
Servo
Motor Control System
|
Click to Get a Quote
|
|
ALLEGRA-2-BLDC-01 |
Plug-and-Play
Two-axis
Programmable
Brushless
DC Servo Motor Control System
|
Click to Get a Quote
|
|
ALLEGRA-3-BLDC-01 |
Plug-and-Play
Three-axis
Programmable
Brushless
DC Servo Motor Control System
|
Click to Get a Quote
|
|
ALLEGRA-4-BLDC-01 |
Plug-and-Play
Four-axis
Programmable
Brushless
DC Servo Motor Control System
|
Click to Get a Quote
|
TThis series is suitable for
three phase brushless DC Servo Motor with Quadrature Incremental Optical Encoders with quadrature incremental optical encoder
and hall effect sensors.
Servo Motor Drivers:
Up to 20.0 Amps Typical Phase Current
Power Supply:
Input Power; 115 or 230 VAC, 50 – 60 Hz
|
|
For a different configuration, please
contact us
for a prompt quotation.
|
