About Us

Knowledge Center


Terms of Use

Featured Products

Site Map


Contact Us

Servo Motor Controller and Driver
MCAD Series

Programming Examples
More Info...

Related Products

DC Servo Motors
  • Plug-and-Play
  • Runs DC Servo Motors
  • Quick and Easy to Install

  • Very Compact and Easy to Use

  • Low Power Consumption

  • Capable of Running Script Command
  • Up to 10 Amp Motor Output
  • +7.5 VDC to +40 VDC Power Supply
  • PID Closed Loop Operation
  • Quadrature Encoder Feedback
  • Analog Feedback
  • LED Fault Indicator

  • Different Modes of Operation:

    • Stand-alone, No PC Required to Operate

    • Host Controlled, PLC, C/C++, Python, Visual Basic, LabVIEW™, MATLAB™

Mechanical Specifications

  • 1.76" (44.7 mm) X 3.7" (94 mm) X 2.0'' (50 mm)


Dedicated Inputs

  • Positive and Negative Limit Switches
  • Home Switch

General Purpose Digital Input / Output

  • 4 TTL / CMOS Inputs
  • 4 TTL / CMOS Outputs

General Purpose Analog Input 

  • 6 Inputs
  • 10 Bits of Resolution

Communication Interface

  • USB Interface

The MCAD series is a high performance, cost effective Servo Motor Controller and Driver to implement intelligent Motion Control. The driver incorporates an advanced architecture and surface mount technology to achieve an exceptional power density.

This series of servo motor controller and driver is designed to drive voice coil, brush-type and Linear DC (voice coil) motors.

This module is an
easy-to-use, plug-and-play and cost effective solution for single-axis servo motor control applications. It may be used as a stand-alone unit or may be commanded by an external device.

The powerful programming instructions motion control, system configuration, data flow, program flow commands, 32-bit logical and mathematical operations, and other miscellaneous instructions.

The card may be controlled in different ways;

1) Stand-alone
In this mode, the controller does not need an external device such as a PC to operate. The controller is programmed in a simple programming language. The code is developed, downloaded to the controller, run and saved in the controller's non-volatile memory using the supplied Integrated Development Environment (IDE) software.

2) Externally Controlled
In this mode, the external host such as a PC, micro-controller or PLC sends a series of commands to the controller via the RS-232 serial port. The controller processes and performs the incoming commands and responds with proper messages.

3) Control Panel
The supplied user friendly Control Panel software allows the user to set-up the module quickly. The operator is able  to move the mechanism to different positions by pressing the corresponding buttons of the Control Panel.

Ordering Information

Part No. Description Amount
MCAD-01 Single-axis, Servo Motor Controller and Driver, up to +40 VDC Power Supply Click to Get a Quote
Sharing link:


Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products |Site Map | Videos | Contact Us