1)
Stand-alone
In this mode, the motion controller does not need an
external device such as a PC to operate. The
controller is programmed in a simple programming
language. The code is developed, downloaded to the
controller, run and saved in the controller's
non-volatile memory using the supplied Integrated
Development Environment (IDE) software.
2)
Externally Controlled
In this mode, the external host such as a PC,
micro-motion controller or PLC sends a series of commands
to the motion controller via the RS-232 serial port. The
controller processes and performs the incoming
commands and responds with proper messages.
3)
Manual Mode
In this mode, the
motion controller
is operated using an
analog joystick or a trackball.
The speed of the
motor is
proportional to the tilt angle of the joystick
or the rotational
speed of the trackball.
