Motorized Rotary Stage

Solid Core Motorized Rotary Table, Stage Diameter: 2.362 in (60 mm)

Stepper Motor Driven Hollow Core Rotary Stage, Stage Diameter: 60 mm


Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Rotary Stage, Diameter: 60 mm	Stepper Motor Driven Hollow Core Rotary Stage with Quadrature Optical Encoder, Stage Diameter: 60 mm

This motorized rotary stage is made of aluminum alloy with an elegant black anodized surface.

The drive mechanism is worm and worm gear. The worm gear ratio is 90:1 .

The maximum load of this rotary table is 30 Kg.

This 60 mm diameter rotary actuator has a body weight of 1.2 Kg.

The resolution of 0.002 Degrees is achieved with a 10 micro-steps per step stepper motor driver. This rotation stage is also available with a servo motor and optical encoder.

The top plate mounted indicator shows the angle of rotation.

The knob mounted on the motor allows for manual adjustment. This knob may be replaced with an optical encoder for precision position verification.

This motorized stage is capable of continuous spinning.

This stage requires a Motion Controller that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control. .

Specifications

Type

AY110-60

Structure Description

Range of Travel

360 Degrees continuous

Stage Diameter

60 mm

Gear Ratio

90:1

Drive Mechanism

Worm Gear

Travel Guide

Bearing

Stepper Motor

DB9 Male pinout

Two-Phase Stepper Motor (1.8 Degrees )

Typical Phase Resistance
Typical Phase Current
DB-9 Male Connector
Pin Assignment and Description
1	+5 VDC for HOME Switch
2	Not Connected
3	Not Connected
4	Common
5	HOME Switch, Open Collector, Normally Open, Needs 1K Pull up Resistor
6	Stepper Motor Phase A+
7	Stepper Motor Phase A-
8	Stepper Motor Phase B+
9	Stepper Motor Phase B-

Base Material

Aluminum Alloy

Surface Treatment

Black Anodized

Load Capacity

30 kg

Weight

2.1 kg (4.5 lb)

Typical Accuracy

Resolution

0.002 Degrees (10 micro-steps per step)

Repeatability

+/-0.01 Degrees

Positional Accuracy

0.05 Degrees

Maximum Speed with stepper motor

30 Degrees per second

Maximum Speed with servo motor

90 Degrees per second

Stepper Motor Driven Mechanical Drawing

Mechanical Drawing of Solid Core Motorized Rotary Table, Stage Diameter: 2.362 in (60 mm)

Ordering Information

Part No.	Description	Amount
AY110-60-01	Stepper Motor Driven Hollow Core Rotary Stage, Stage Diameter: 60 mm	Click to Get a Quote
AY110-60-02	Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Rotary Stage, Stage Diameter: 60 mm	Click to Get a Quote

AY110-60-03	DC Servo Motor with Quadrature Incremental Optical Encoder Driven Rotary Stage, Stage Diameter: 60 mm	Click to Get a Quote
AY110-60-04	Stepper Motor Driven Hollow Core Rotary Stage with 500 Cycles per Revolution Quadrature Optical Encoder Mounted at the back of the Stepper Motor , Stage Diameter: 60 mm	Click to Get a Quote