Motorized Linear X-axis plus Rotary Positioning Stages

This motorized positioning table is made of aluminum alloy with an elegant black anodized surface. It provides 15, 30, 50 and 75 mm of travel at a maximum speed of 5 mm per second. Other sizes and travel strokes are also available. The drive mechanism is high precision crossed roller. This linear stage is also available with a servo motor and optical encoder. The knob mounted on the motors allow for manual adjustment. These knobs may be replaced with an optical encoders for precision position verification. This stage is compatible with OES' line of Motion Controllers.. Specifications Structure Description Linear Travel Range of Travel (mm) Pitch of Lead Screw 15 1 mm per turn 30 1 mm per turn 50 1 mm per turn 75 1 mm per turn longer than 100 4 mm per turn Rotary Travel 360 Degrees Continuous Travel Guide High Precision Crossed Roller Motor   Phase Resistance 3.8 Ohms, Bi-directional Typical Phase Current 1 Amp DB-9 Male Connector Pin Assignment and Description 1 +5 VDC for the Limit Sensors 2 CW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor (1000 Ohms) 3 CCW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor (1000 Ohms) 4 Return for+5 VDC 5 Not Connected 6 Stepper Motor Phase A+ 7 Stepper Motor Phase A- 8 Stepper Motor Phase B+ 9 Stepper Motor Phase B- Body Material Aluminum Alloy Surface Treatment Black Anodized Typical Accuracy Resolution Configuration Dependent Maximum Speed 5 mm / sec Repeatability 10 μ Positional Accuracy 10 μ Accessories Description Optional Optical Encoders Optional Servo Motors Other Sizes and Strokes Available Ordering Information Part No. Description Amount XR-xxxx-rrr-vv Linear X-axis and Rotary Stage xxxx denotes the stroke of the X-axis in mm. rrr donates the rotary stage diameter in mm. vv denotes the version. Click to Get a Quote