| |
Motorized Z-axis Table
|
Home >
Assorted
Motorized Multi-axis Stages
>
Motorized Z-axis Linear
Positioning Stages
|
![](../precision-stages/pics/Motorized-Z-axis-Linear-Positioning-Stages.jpg)
|
This
motorized
positioning table
is made of
aluminum
alloy with
an elegant
black
anodized
surface.
It provides
300 mm of
travel at
a Maximum
Speed with
Stepper
Motor of
40 mm per
second.
The drive
mechanism is
lead screw.
The bench
size is 150
X 150 mm and
has a body
weight of
6.3 Kg.
The maximum
load of this
stage
table is 40
Kg.
The
resolution
of 2 microns is
achieved
with a 10
micro-steps
per step
stepper
motor
driver. This
linear
stage is
also
available
with a Three
Phase
Brushless
Servo Motor and
optical
encoder.
The knob mounted on the motor allows for manual adjustment. This knob may be replaced with an optical encoder for precision position verification.
This
stage requires a
Motion Controller
that can be
ordered as a
complete
plug-and-play
system with
RS-232, USB,
joystick,
trackball,
and keypad
control. |
Specifications
Type |
Z150-300H |
Structure
Description |
Travel |
300 mm |
Stage Size |
150×150 mm |
Lead Screw Pitch |
4 mm per turn |
Travel Guide |
High Precision Linear Slide Guide |
![](pics/Motorized%20Linear%20Stage%20Pin%20Assignment.gif) |
Two-Phase Stepper Motor (1.8°) |
Typical Phase Resistance
|
3.8 Ohms, Bi-directional |
Typical Phase Current |
1 Amp |
DB-9 Male Connector |
Pin Assignment and Description |
1 |
+5 VDC |
2 |
CW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor |
3 |
CCW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor |
4 |
Common |
5 |
Not Connected |
6 |
Stepper Motor Phase A+ |
7 |
Stepper Motor Phase A- |
8 |
Stepper Motor Phase B+ |
9 |
Stepper Motor Phase B- |
|
|
Body Material |
Aluminum Alloy |
Surface Treatment |
Black Anodized |
Load capacity |
40 kg |
Weight |
6.3 kg |
Typical Accuracy
|
Resolution |
Control Electronics Dependent, 2 microns with 10 Micro-steps per Step Motor Driver in use
|
Maximum Speed with Stepper Motor |
25 mm/sec |
Maximum Speed with Servo Motor |
|
Positioning Accuracy |
10 microns |
Accessories
Description
|
Optical Encoder |
Three Phase Brushless Servo Motor and Optical Encoder (-02 Version) |
|
|
Stepper Motor Driven Mechanical Drawing
![](pics/AQ150-md.jpg)
|
|
|
Ordering Information
Part No. |
Description |
Amount |
Z150-300H-01 |
Stepper Motor Driven Linear Single-axis Stage, Travel
: 300 mm |
Click to Get a Quote |
Z150-300H-02 |
Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Linear Single-axis Stage, Travel
: 300 mm |
Click to Get a Quote |
|
|