| |
Motorized Single-axis Table
|
Home >
Motorized Linear Actuators
>
Low Cost Linear
Single-axis Stages
|
![](pics/AQ140.jpg)
|
This
motorized
positioning table
is made of
aluminum
alloy with
an elegant
black
anodized
surface.
It provides
500 mm of
travel at
a Maximum
Speed with
Stepper
Motor of
40 mm per
second.
The drive
mechanism is
lead screw.
The bench
size is 120
x 120 mm and
has a body
weight of
8.3 Kg.
The maximum
load of this
stage
table is 30
Kg.
The resolution of
2.0 microns
is achieved
with a 10
micro-steps
per step
stepper
motor
driver. This
linear
stage is
also
available
with a Three
Phase
Brushless
Servo Motor
and Optical
Encoder (-02
Version)
The knob mounted on the motor allows for manual adjustment. This knob may be replaced with an
Optical
Encoder (-04
Version) for precision position verification.
This
stage requires a
Motion Controller
that can be
ordered as a
complete
plug-and-play
system with
RS-232, USB,
joystick,
trackball,
and keypad
control. |
Specifications
Type |
AQ140-500 |
Structure
Description |
Travel |
500 mm |
Stage Size |
120 ×120 mm |
Lead Screw Pitch |
4 mm per turn |
Travel Guide |
High Precision Linear Ball Bearing |
![](pics/Motorized%20Linear%20Stage%20Pin%20Assignment.gif) |
Two-Phase Stepper Motor (1.8°) |
Typical Phase Resistance
|
2.0
Ohms, Bi-directional |
Typical Phase Current |
2 Amps |
DB-9 Male Connector |
Pin Assignment and Description |
1 |
+5 VDC |
2 |
Near Motor Limit Switch Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor |
3 |
Far End Limit Switch Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor |
4 |
Common |
5 |
Not Connected |
6 |
Stepper Motor Phase A+ |
7 |
Stepper Motor Phase A- |
8 |
Stepper Motor Phase B+ |
9 |
Stepper Motor Phase B- |
|
|
Body Material |
Aluminum Alloy |
Surface Treatment |
Black Anodized |
Load capacity |
30 Kg |
Weight |
8.3 kg |
Typical Accuracy
|
Resolution |
2 microns with 10 Micro-steps per Step Motor Driver in use
1.25 microns with 20 Micro-steps per Step Motor Driver in use |
Maximum Speed with Stepper Motor |
80 mm/sec |
Maximum Speed with Servo Motor |
|
Positioning Accuracy |
10 microns |
Accessories
Description
|
Optical Encoder (-04 Version) |
Three Phase Brushless Servo Motor and Optical Encoder (-02 Version)
|
|
|
|
|
Ordering Information
Part No. |
Description |
Amount |
AQ140-500-01 |
Stepper Motor Driven Linear Single-axis Stage, Travel
: 500 mm |
Click to Get a Quote |
AQ140-500-02 |
Three Phase Brushless Servo Motor with Quadrature Incremental
Optical Encoder Driven Linear Single-axis Stage, Travel
: 500 mm |
Click to Get a Quote |
AQ140-500-03 |
DC Servo Motor with Quadrature Incremental
Optical Encoder Driven Linear Single-axis Stage |
Click to Get a Quote |
AQ140-500-04 |
Stepper Motor Driven
Linear Single-axis Stage with 500 Cycles per Revolution
Quadrature Optical Encoder Mounted at the back
of the Stepper Motor |
Click to Get a Quote |
|
|