|
|
Specifications
| |
|
|
Structure
Description |
Linear Travel |
|
Range of
Travel (mm) |
Pitch of Lead
Screw |
| 15 |
1
mm per turn |
| 30 |
1
mm per turn |
| 50 |
1
mm per turn |
| 75 |
1
mm per turn |
| 100 |
4
mm per turn |
| 150 |
4
mm per turn |
| 200 |
4
mm per turn |
| 300 |
4
mm per turn |
| 400 |
4
mm per turn |
|
| Rotary Travel |
360 Degrees Continuous |
| Travel Guide |
High Precision Crossed Roller |
| Motor |
| |
|
Phase Resistance
|
3.8 Ohm, Bi-directional |
| Maximum Phase Current |
1 Amp |
|
9 pin DB-9 Male Connector |
|
Pin Assignment and Description |
| 1 |
+5 VDC for the Limit Sensors |
| 2 |
Positive Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor (1000 OHM)
|
| 3 |
Negative Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor (1000 OHM)
|
| 4 |
Return for+5 VDC |
|
5 |
Not Connected |
|
6 |
Phase A+ |
| 7 |
Phase A- |
| 8 |
Phase B+ |
| 9 |
Phase B- |
|
| Main Material |
Aluminum Alloy |
| Surface Treatment |
Black Anodized |
|
Typical Accuracy
|
Resolution |
Configuration Dependent |
| Maximum Speed |
5 mm / sec |
| Repeatability |
3 μ |
| Positional Accuracy |
10 μ |
|
Accessories
Description
|
Optional Optical Encoders
Optional Servo Motors
Optional Built-in Stepper Motor Drivers
Other Sizes and Strokes Available |
|
|
