| |
Solid Core Motorized XY Table
|
Home >
Motorized XY Stages |
![Solid Core Motorized Dual-axis Table, Range of Travel: 50 mm x 50 mm](pics/solid-core-mMotorized-XY-table.jpg)
|
The AU200-50X50-SC Motorized XY Stage is a high resolution, low profile, high load capacity, horizontal stage that can be easily integrated into any current or future application.
The large 6.1 in x 6.1 in (155 mm x 155 mm) platform has a large aperture for optical application. A solid top is also available.
The precision ground screws provide 2.65 in x 2.65 in (50 mm x 50 mm) of travel with high resolution and repeatability. Two hand knobs are mounted on the motors to provide for manual adjustment. This knob may be replaced with an optical encoder for position verification. The stepper motor may be replaced with a servo motor.
Some applications for the AU200-50X50-SC two-axes stage include: testing, inspection, assembly and sampling in a broad range of industrial, medical, semiconductor and research facilities.
The AU200-50X50-SC low profile 1.36 in (34.5 mm) horizontal stage is constructed with black-anodized aluminum alloy and weighs just 7.1 lbs (3.2 kg). The 2-phase stepper motor and precision 1 mm per turn lead screw offer high load capacity up to 22 lbs (10 kg). The moving platform has access from all four sides and the base plate has easy to access holes for mounting.
This
stage requires a
Motion Controller
that can be
ordered as a
complete
plug-and-play
system with
RS-232, USB,
joystick,
trackball,
and keypad
control. |
Specifications
Type |
AU200-50X50-SC |
Structure
Description |
Range of Travel |
50 mm |
Table Size |
155 mm x155 mm |
Actuator Type |
Lead Screw (1 mm per turn) |
Travel Guide |
Precision V-groove & Crossed Roller |
DB-9 Male Connector
![](low-cost-series/pics/Motorized%20Linear%20Stage%20Pin%20Assignment.gif) |
Two Phase Stepper Motor (1.8°) |
|
Typical Phase Resistance |
3.8 Ohms, Bi-directional |
Typical Phase Current |
1 Amp |
|
Pin Assignment and Description |
1 |
+5 VDC |
2 |
CCW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor |
3 |
CW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor |
4 |
Common |
5 |
Not Connected |
6 |
Stepper Motor Phase A+ |
7 |
Stepper Motor Phase A- |
8 |
Stepper Motor Phase B+ |
9 |
Stepper Motor Phase B- |
|
Base Material |
Aluminum Alloy |
Surface Treatment |
Black Anodized |
Load Capacity |
10 kg |
Weight |
3.2 kg |
Thickness |
55.5 mm |
Typical Accuracy
Description
|
Resolution |
5microns (Full Step)
0.125microns (20 Micro-steps per Step Motor Driver in use) |
Repeatability |
1.5 microns |
Positional Accuracy |
5 microns |
Accessories
Description
|
Optical Encoder |
|
Stepper Motor Driven Mechanical Drawing
![Mechanical Drawing of Solid Core Motorized Two-axis Table, Range of Travel: 50 mm x 50 mm](pics/solid-core-motorized-linear-two-axis-stage-travel-50-mm-by-50-mm.jpg)
|
|
|
Ordering Information
Part No. |
Description |
Amount |
AU200-50X50-SC-01 |
Solid Core Motorized Linear Two-axis Stage, Range of Travel: 50 mm x 50 mm |
Click to Get a Quote |
AU200-50X50-SC-04 |
Solid Core Motorized Linear Two-axis Stage
with 500 Cycles per Revolution Quadrature Optical Encoder
Mounted at the back of the Stepper Motor,
Range of Travel: 50 mm x 50 mm |
Click to Get a Quote |
|
Related Products
|