| |
Motorized XY Table
|
Home >
Motorized XY Stages |
![Motorized Dual-axis Table, Range of Travel: 100 mm x 100 mm](pics/AU200-100x100.jpg) |
The AU200-200x200 Motorized XY Stage is a high resolution, low profile, high load capacity, horizontal stage that can be easily integrated into any current or future application.
The large 15.75 in x 15.75 in (400 mm x 400 mm) platform has a large aperture for optical application. A solid top is also available.
The precision ground screws provide 7.88 in x 7.88 in (200 mm x 200 mm) of travel with high resolution and repeatability. Two hand knobs are mounted on the motors to provide for manual adjustment. This knob may be replaced with an optical encoder for position verification. The stepper motor may be replaced with a servo motor.
Some applications for the AU200-200x200 two-axes stage include: testing, inspection, assembly and sampling in a broad range of industrial, medical, semiconductor and research facilities.
The AU200-200x200 low profile 3.15 in (80 mm) horizontal stage is constructed with black-anodized aluminum alloy and weighs just 18.3 lbs (8.3 kg). The 2-phase NEMA 17 stepper motor and precision 4 mm per turn lead screw offer high load capacity up to 110 lbs (50 kg). The moving platform has access from all four sides and the base plate has easy to access holes for mounting.
This
stage requires a
Motion Controller
that can be
ordered as a
complete
plug-and-play
system with
RS-232, USB,
joystick,
trackball,
and keypad
control.
|
Specifications
Type |
AU200-200x200 |
Structure Description |
Range of Travel |
200 mm |
Table Size |
300 mm x 300 mm |
Aperture Size |
188 mm x 188 mm |
Actuator Type |
Lead Screw: 4 mm per turn |
Travel Guide |
Precision V-groove & Crossed Roller |
DB-9 Male Connector
![](low-cost-series/pics/Motorized%20Linear%20Stage%20Pin%20Assignment.gif)
|
Two Phase Stepper Motor (1.8°) |
|
Typical Phase Resistance |
3.8 Ohms, Bi-directional |
Typical Phase Current |
1 Amp |
|
Pin Assignment and Description |
1 |
+5 VDC |
2 |
CCW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor |
3 |
CW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor |
4 |
Common |
5 |
Not Connected |
6 |
Stepper Motor Phase A+ |
7 |
Stepper Motor Phase A- |
8 |
Stepper Motor Phase B+ |
9 |
Stepper Motor Phase B- |
|
Base Material |
Aluminum Alloy |
Surface Treatment |
Black Anodized |
Load Capacity |
50 kg |
Weight |
14.5 kg |
Typical Accuracy Description
|
Resolution |
Control Electronics Dependent
20 microns (Full Step)
2 microns with 10 Micro-steps per Step Motor Driver in use |
Repeatability |
2 microns |
Positional Accuracy |
10 microns |
Accessories Description
|
|
Servo Motor Optical Encoder |
|
|
|
Ordering Information
Part No. |
Description |
Amount |
AU200-200x200-01 |
Stepper Motor Driven
Linear Two-axis Stage,
Range of Travel: 200 mm x200 mm |
Click to Get a Quote |
AU200-200x200-02 |
Three Phase Brushless Servo Motor with Quadrature Incremental
Optical Encoder Driven
Linear Two-axis Stage,
Range of Travel: 200 mm x200 mm |
Click to Get a Quote |
AU200-200x200-03 |
DC Brush
Servo Motor with Quadrature Incremental
Optical Encoder Driven
Linear Two-axis Stage,
Range of Travel: 200 mm x200 mm |
Click to Get a Quote |
AU200-200x200-04 |
Stepper Motor Driven
Linear Two-axis Stage with 500 Cycles per
Revolution Quadrature Encoders Mounted at the back of Stepper
Motors,
Range of Travel: 200 mm x200 mm |
Click to Get a Quote |
|
Related Products
|