|
| |
Motorized Linear Vertical Stage
|
|
Home >
Motorized Vertical Single-axis Stages |
Applications for the AT20-300 motorized Vertical Lift Stage include: Positioning of Flasks, stirrers, hotplates, and other lab equipment, testing, inspection, assembly, sampling, laser drilling and machining in a broad range of industrial, medical, semiconductor, and research applications.
It is constructed of black-anodized aluminum alloy and steel
shafting. A powerful two phase NEMA stepper motor and precision ground lead screw offers a high load capacity to 50kg without the concern for cantilevered effects (loss of parallelism), additionally, the stage has access from all four sides. The limit switches prevent over travel, a hand knob on the extended motor shaft is for manual adjustments, and the large base plate has easy access to mounting holes.
The AT20-300 Vertical Lift Stage options include: servo
motor, optical encoder. It is also available as a complete plug-and-play
system with a
Motion Controller.
|
|
Specifications
|
| Type |
AT20-300 |
|
Structure
Description |
Range of Travel |
300 mm |
| Table Size |
|
| Actuator Type |
Lead Screw |
| Travel Guide |
Slide Rail |
| Two Phase Stepper Motor
 |
| Typical Phase Resistance |
2.3 Ohms, Bi-directional |
| Typical Phase Current |
2 Amp |
|
DB-9 Male Connector |
|
Pin Assignment and Description |
|
1 |
Not Connected |
| 2 |
Upper Limit Switch, Normally Open |
| 3 |
Lower Limit Switch, Normally Open |
| 4 |
Ground |
| 5 |
Not Connected |
|
6 |
Stepper Motor Phase A+ |
| 7 |
Stepper Motor Phase A- |
| 8 |
Stepper Motor Phase B+ |
| 9 |
Stepper Motor Phase B- |
|
| Base Material |
Aluminum Alloy |
| Surface Treatment |
Black Anodized |
| Load Capacity |
50 kg |
| Weight |
|
|
Typical Accuracy
Description
|
Transmission
Ratio |
663
microns
per
motor
revolution |
| Repeatability |
5
microns |
| Positional Accuracy |
20
microns |
| Backlash |
4
microns |
|
|
|
Ordering Information
|
Part No. |
Description |
Amount |
|
AT20-300-01 |
Stepper Motor Driven
Linear Vertical Stage, Load Capacity:
50 kg, Range of Travel: 300 mm |
Click to Get a Quote |
|
AT20-300-02 |
Brushless
DC Servo Motor with Quadrature Incremental Optical Encoder
Driven
Linear Vertical Stage,
Load Capacity
50 kg,
Range of Travel: 300 mm |
Click to Get a Quote |
|
AT20-300-03 |
DC Servo Motor with Quadrature Incremental Optical Encoder
Driven
Linear Vertical Stage,
Load Capacity
50 kg,
Range of Travel: 300 mm |
Click to Get a Quote |
|
AT20-300-04 |
Stepper Motor Driven
Linear Vertical Stage
with 500 Cycle per Revolution Quadrature
Optical Encoder, Load Capacity:
50 kg, Range of Travel: 300 mm |
Click to Get a Quote |
|
Related Products
|
