|
| |
Motorized Linear Vertical Stage
|
|
Home
>
Motorized Vertical Single-axis Stages
|
|
Applications for the AT20-200 vertical lift stage include:
Testing, inspection, assembly, sampling, laser drilling and machining in a broad
range of industrial, medical, semiconductor, and research facilities.
Applications for the AT20-200 motorized Vertical Lift Stage include: Positioning of Flasks, stirrers, hotplates, and other lab equipment, testing, inspection, assembly, sampling, laser drilling and machining in a broad range of industrial, medical, semiconductor, and research applications.
It is constructed of black-anodized aluminum alloy and steel
shafting. A powerful two phase NEMA stepper motor and precision ground lead screw offers a high load capacity to 50kg without the concern for cantilevered effects (loss of parallelism), additionally, the stage has access from all four sides. The limit switches prevent over travel, a hand knob on the extended motor shaft is for manual adjustments, and the large base plate has easy access to mounting holes.
This stage requires a
Motion Controller
that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control.
|
|
Specifications
|
|
Type
|
AT20-200
|
|
Structure
Description
|
Range of Travel |
200 mm |
| Table Size |
200 mm x 400 mm
|
| Actuator Type |
Lead Screw |
| Travel Guide |
Slide Rail |
| Two Phase Stepper Motor
|
|
Two-Phase Stepper Motor
|
|
Typical Phase Resistance
|
3.8 Ohms, Bi-directional
|
| Typical Phase Current |
1 Amp |
| |
|
Pin Assignment and Description
|
| 1 |
Not Connected
|
| 2 |
Upper Limit Switch, Normally Open |
| 3 |
Lower Limit Switch, Normally Open
|
| 4 |
Ground
|
|
5
|
Not Connected
|
|
6
|
Stepper Motor Phase A+ |
| 7 |
Stepper Motor Phase A- |
| 8 |
Stepper Motor Phase B+ |
| 9 |
Stepper Motor Phase B- |
|
|
Base Material
|
Aluminum Alloy |
|
Surface Treatment
|
Black Anodized |
|
Load Capacity
|
50 kg |
|
Weight
|
|
|
Maximum Speed with Stepper Motor
|
4
mm / sec
|
|
Maximum Speed with Servo Motor
|
20 mm / sec
|
|
Transmission
Ratio
|
250 microns per motor turn |
|
Typical Accuracy
Description
|
| Repeatability |
+/- 5 microns
|
|
Positional Accuracy
|
15 microns
|
|
|
|
Ordering Information
|
Part No.
|
Description
|
Amount
|
|
AT20-200-01
|
Stepper Motor Driven
Linear Vertical Stage, Load Capacity:
50 kg, Range of Travel: 200 mm
|
Click to Get a Quote
|
|
AT20-200-02
|
Three Phase Brushless Servo Motor
with Quadrature Incremental Optical Encoder Driven
Linear Vertical Stage, Load Capacity
50 kg,
Range of Travel: 200 mm
|
Click to Get a Quote
|
|
AT20-200-03
|
DC Brush
Servo Motor
with Quadrature Incremental Optical Encoder Driven
Linear Vertical Stage, Load Capacity
50 kg,
Range of Travel: 200 mm
|
Click to Get a Quote
|
|
AT20-200-04
|
Stepper Motor Driven
Linear Vertical Stage
with 500 Cycle per Revolution Quadrature
Optical Encoder
, Load Capacity:
50 kg, Range of Travel: 200 mm
|
Click to Get a Quote
|
|
Related Products
|
