Motorized Goniometer Stage

Home > Motorized Goniometer Stages

This motorized goniometer is made of aluminum alloy with an elegant black anodized surface.

The bench size is 120 X 130 mm and has a body weight of 5.9 kg.

The drive mechanism is worm and worm gear. The worm gear ratio is 304:360.

It provides +/-15° of rotation at a maximum speed of 10° per second.

The maximum load of this goniometer table is 15 kg.

This goniometer stage is also available with a Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder and optical encoder.

The calibrated indicator shows the angle of rotation.

The knob mounted on the motor allows for manual adjustment. This knob may be replaced with an optical encoder for precision position verification.

This stage requires a Motion Controller that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control.

Specifications

Type

XO07GA-15

Range of Travel

+/-15°

Table Size

120 mm x 130 mm

Gear Ratio

15 (degrees stage) : 304 (degrees motor)

Height of Rotation Stage

120 mm +/-0.2 mm

Drive Mechanism

Worm Gear

Travel Guide

Crossed-roller Guide

Stepper Motor

Typical Phase Resistance	2.5 Ohms, Bi-directional
Typical Phase Current	1 Amp
DB-9 Male Connector
Pin Assignment and Description
1,2,3,4,5
6	Stepper Motor Phase A+
7	Stepper Motor Phase A-
8	Stepper Motor Phase B+
9	Stepper Motor Phase B-

Base Material

Aluminum Alloy

Surface Treatment

Black Anodized

Load Capacity

15 kg

Weight

5.9 kg

Rotation Center Deflection Accuracy

0.03 mm

Maximum Speed

10°/sec

Typical Repeatability

+/-3 arcsec

Typical Positioning Accuracy

+/-8 arcsec

Typical Backlash

+/-3 arcsec

Mechanical Drawing

Ordering Information

Part No.	Description	Amount
XO07GA-15-01	Stepper Motor Driven Goniometer Stage, Table Size 120 x 130 mm	Click to Get a Quote
XO07GA-15-02	Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Goniometer Stage, Table Size 120 x 130 mm	Click to Get a Quote