|
| |
-theta Alignment Stage
|
|
Home
>
XY-theta Alignment Stages
|
|
|
The
XYR-100-100
Motorized XY-theta Stage is a high resolution, low profile, high load capacity, horizontal stage that can be easily integrated into any current or future application.
The precision ground screws provide +/-1.968 in x +/-1.968 in (
+/-50 mm x
+/-50 mm) of travel in XY plane with high resolution and repeatability. The theta (rotary) axis range of travel is
+/-180 Degrees continuous.
Some applications for the three-axis alignment stage include: testing, inspection, assembly and sampling in a broad range of industrial, medical, semiconductor and research facilities.
The X and Y axes incorporate the positive and negative limit switches. The rotary stage incorporates a HOME (INDEX) switch.
The stage is also available with servo motors.
A hollow core version is also available.
This stage requires a
Motion Controller
that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control.
|
Part No.
.
|
Table
Diameter (mm)
|
Gear Ratio
|
Range of Travel
|
Thickness
(mm)
|
Load Capacity (kg)
|
|
X
|
Y
|
θ
|
X (mm)
|
Y (mm)
|
θ (Deg)
|
|
XYR-100-100-01
|
100
|
4
mm per Motor Revolution
|
4
mm per Motor Revolution
|
2 Deg per Motor Revolution
|
10
0
|
10
0
|
360 Continuous
|
125 |
45
|
|
|
Type
|
XY Plane
|
|
Structure Description
|
Range of Travel
|
100 mm X 100 mm
|
|
Table Diameter
|
100 mm
|
|
Actuator Type
|
Lead Screw (1 mm per turn)
|
|
Travel Guide
|
Precision V-groove & Crossed Roller
|
|
Motor
|
Two Phase Stepper Motor (1.8 Deg)
|
|
Base Material
|
Aluminum Alloy
|
|
Surface Treatment
|
Black Anodized
|
|
Load Capacity
|
45 kg
|
|
Typical Accuracy Description
|
Resolution
|
20 microns (Full Step)
1 microns (20 Micro-steps per Step Motor Driver in use) |
|
Repeatability
|
2 microns
|
|
Positional Accuracy
|
10 microns
|
|
Accessories Description
|
|
|
Servo Motor
Optical Encoder
|
|
Type
|
Rotary axis
|
|
Structure Description
|
Range of Travel |
360 Degrees |
| Stage Diameter |
100 mm
|
|
Through Hole Diameter
|
3
0 mm (Optional)
|
| Gear Ratio |
180:1 |
| Drive Mechanism |
Worm Gear
|
| Travel Guide |
Bearing |
|
|
|
|
Base Material
|
Aluminum Alloy |
|
Surface Treatment
|
Black Anodized |
|
Typical Accuracy
|
|
Resolution
|
0.001 Degrees = 3.6 arcsec (10 Micro-steps per Step Motor Driver in use) |
| |
|
|
Maximum Speed with Stepper Motor
|
12 Degrees per second |
|
Maximum Speed with Servo Motor
|
45 Degrees per second |
| Positional Accuracy |
0.05 Degrees |
|
Repeatability
|
+/-0.01 Degrees
|
Electrical Connection
Two-Phase Stepper Motor (1.8 Deg) Typical Phase Current: 1.0 Amp
DB-9
Male Connector
,
X and Y axes
|
Pin No.
|
Description
|
|
1 |
+5 VDC for the Limit Sensors |
|
2 |
CCW Limit Switch
The table moves away from the motor
The knob turns counter clockwise
Open Collector
Normally Open
Needs Pull up Resistor (typically 1000 Ohms)
|
|
3 |
CW Limit Switch
The table moves towards the motor
The knob turns clockwise
Open Collector
Normally Open
Needs Pull up Resistor (typically 1000 Ohms)
|
|
4 |
Return for+5 VDC
|
|
5 |
Not Connected
|
|
6 |
Stepper Motor Phase A+ |
|
7 |
Stepper Motor Phase A- |
|
8 |
Stepper Motor Phase B+ |
|
9 |
Stepper Motor Phase B- |
DB-9
Male Connector
,
Rotary axis
|
Pin No.
|
Description
|
|
1 |
+5 VDC
Input
|
|
2 |
Not Connected
|
|
3 |
Not Connected
|
|
4 |
Common
|
|
5 |
HONE (INDEX) Signal
Open Collector
Normally Open
Needs Pull up Resistor (typically 1000 Ohms)
|
|
6 |
Stepper Motor Stepper Motor Phase A+ |
|
7 |
Stepper Motor Stepper Motor Phase A- |
|
8 |
Stepper Motor Stepper Motor Phase B+
|
|
9 |
Stepper Motor Stepper Motor Phase B- |
Stepper Motor Driven Mechanical Drawing
- 100 mm
|
|
|
Ordering Information
|
Part No.
|
Description
|
Amount
|
|
XYR-100-100-01
|
Stepper Motor Driven
XY-Rotary Alignment Stage, Range of Travel,
X-axis 100 mm, Y-axis 100 mm, Rotary-axis 360 (Deg Continuous),
Table Diameter 100 mm
|
Click to Get a Quote
|
|
XYR-100-100-02
|
Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven
XY-Rotary Alignment Stage, Range of Travel,
X-axis 100 mm, Y-axis 100 mm, Rotary-axis 360 (Deg Continuous),
Table Diameter 100 mm
|
Click to Get a Quote
|
|
XYR-100-100-03
|
DC Servo Motor with Quadrature Incremental Optical Encoder Driven
XY-Rotary Alignment Stage, Range of Travel,
X-axis 100 mm, Y-axis 100 mm, Rotary-axis 360 (Deg Continuous),
Table Diameter 100 mm
|
Click to Get a Quote
|
|
XYR-100-100-04
|
Stepper Motor Driven
XY-Rotary Alignment Stage
with 500 Cycles per Revolution Quadrature Optical Encoder Mounted at the
back of the Stepper Motor
,
Range of Travel, X-axis 100 mm, Y-axis 100 mm, Rotary-axis 360
(Deg Continuous), Table Diameter 100 mm
|
Click to Get a Quote
|
|
|
