Motorized Dual-axis Linear Positioning Stages

Home > Assorted Motorized Multi-axis Actuators

These motorized positioning tables are made of aluminum alloy with an elegant black anodized surface.

They provide up to 1000 mm of travel at a maximum speed of 50 mm per second.

The drive mechanism is high precision crossed roller.

These linear stages are also available with a Servo Motor (-02)s and optical encoders.

The knob mounted on the motors allow for manual adjustment. These knobs may be replaced with optical encoders for precision position verification.

This stage requires a Motion Controller that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control.

Specifications

Structure Description

Travel

Range of Travel (mm)	Pitch of Lead Screw	Resolution	Maximum Speed
15	1 mm per turn	0.5 microns (10 Micro-steps per Step Motor Driver in use)	15 mm / sec
30	1 mm per turn	0.5 microns (10 Micro-steps per Step Motor Driver in use)	15 mm / sec
50	1 mm per turn	0.5 microns (10 Micro-steps per Step Motor Driver in use)	15 mm / sec
75	1 mm per turn	0.5 microns (10 Micro-steps per Step Motor Driver in use)	15 mm / sec
100	4 mm per turn	2 microns (10 Micro-steps per Step Motor Driver in use)	50 mm / sec
150	4 mm per turn	2 microns (10 Micro-steps per Step Motor Driver in use)	50 mm / sec
200	4 mm per turn	2 microns (10 Micro-steps per Step Motor Driver in use)	50 mm / sec
300	4 mm per turn	2 microns (10 Micro-steps per Step Motor Driver in use)	50 mm / sec
400	5 mm per turn	2 microns (10 Micro-steps per Step Motor Driver in use)	50 mm / sec
500	5 mm per turn	2 microns (10 Micro-steps per Step Motor Driver in use)	50 mm / sec

Travel Guide

High Precision Crossed Roller

Motor

DB9 Male pinout


Typical Phase Resistance	3.8 Ohms, Bi-directional
Typical Phase Current	1 Amp
DB-9 Male Connector
Pin Assignment and Description
1	+5 VDC for the Limit Sensors
2	Far End Limit Switch Open Collector or Normally Open Needs Pull up Resistor (typically 1000 Ohms)
3	Near Motor Limit Switch Open Collector or Normally Open Needs Pull up Resistor (typically 1000 Ohms)
4	Return for+5 VDC
5	Not Connected
6	Stepper Motor Phase A+
7	Stepper Motor Phase A-
8	Stepper Motor Phase B+
9	Stepper Motor Phase B-

Body Material

Aluminum Alloy

Surface Treatment

Black Anodized

Typical Accuracy

Resolution

Configuration Dependent

Repeatability

5 microns

Positioning Accuracy

10 microns

Accessories Description

Optional Optical Encoders (-04)
Other Sizes and Strokes Available

Ordering Information

Part No.	Description
XY110-15	Stepper Motor Driven Two-axis XY-plane Stage, Travel : 15 mm	Click to Get a Quote
XY110-30	Stepper Motor Driven Two-axis XY-plane Stage, Travel : 30 mm	Click to Get a Quote
XY110-50	Stepper Motor Driven Two-axis XY-plane Stage, Travel : 50 mm	Click to Get a Quote
XY110-75	Stepper Motor Driven Two-axis XY-plane Stage, Travel : 75 mm	Click to Get a Quote
XY140-100	Stepper Motor Driven Linear Three-axis Stage, Travel : 150 mm	Click to Get a Quote
XY140-150	Stepper Motor Driven Linear Three-axis Stage, Travel : 150 mm	Click to Get a Quote
XY140-200	Stepper Motor Driven Linear Three-axis Stage, Travel : 200 mm	Click to Get a Quote
XY140-300	Stepper Motor Driven Linear Three-axis Stage, Travel : 300 mm	Click to Get a Quote
XY140-400	Stepper Motor Driven Linear Three-axis Stage, Travel : 400 mm	Click to Get a Quote
XY140-500	Stepper Motor Driven Linear Three-axis Stage, Travel : 500 mm	Click to Get a Quote

XY-xxxx-yyyy-01	Stepper Motor Driven Two-axis XY-plane Stage xxxx denotes the stroke of the X-axis in mm. yyyy denotes the stroke of the Y-axis in mm.	Click to Get a Quote
XY-xxxx-yyyy-02	Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Two-axis XY-plane Stage xxxx denotes the stroke of the X-axis in mm. yyyy denotes the stroke of the Y-axis in mm.	Click to Get a Quote
XY-xxxx-yyyy-03	DC Brush Servo Motor with Quadrature Incremental Optical Encoder Driven Two-axis XY-plane Stage xxxx denotes the stroke of the X-axis in mm. yyyy denotes the stroke of the Y-axis in mm.	Click to Get a Quote
XY-xxxx-yyyy-04	Stepper Motor Driven Two-axis XY-plane Stage with 500 Cycles per Revolution Quadrature Optical Encoder Mounted at the back of the Stepper Motor xxxx denotes the stroke of the X-axis in mm. yyyy denotes the stroke of the Y-axis in mm.	Click to Get a Quote