About Us

Knowledge Center


Terms of Use

Featured Products

Site Map


Contact Us

Motorized Rotary Stage

Home > Motorized Rotary Stages

This motorized rotary stage is made of aluminum alloy with an elegant black anodized surface.

The drive mechanism is worm and worm gear. The worm gear ratio is 180:1.

It provides 360 of rotation at a maximum speed of 25 per second.

The maximum load of this rotary table is 45 Kg.

This 100 mm diameter rotary actuator has a body weight of 1.7 Kg.

The resolution of 0.001  is achieved with a 10 micro-steps per step stepper motor driver. This rotation stage is also available with a servo motor and optical encoder.

The top plate mounted indicator shows the angle of rotation.

The knob mounted on the motor allows for manual adjustment. This knob may be replaced with an optical encoder for precision position verification.

This stage is compatible with OES' line of Motion Controllers..




Structure Description

Range of Travel


Stage Diameter 100 mm
Transmission Ratio 180:1
Drive Mechanism

Worm Gear

Travel Guide Bearing
Stepper Motor
Phase Resistance 3.8 Ohm, Bi-directional
Typical Phase Current 1 Amp
DB-9 Male Connector
Pin Assignment and Description
1,2,3,4,5 Not Connected
6 Motor Phase A+
7 Motor Phase A-
8 Motor Phase B+
9 Motor Phase B-
Base Material Aluminum Alloy
Surface Treatment Black Anodized
Load Capacity 45 kg
Weight 1.7 kg

Typical Accuracy

Resolution 0.001
(10 Micro-step per Step Driver in use)
Speed 25 /sec
Repeatability 0.005=18''
Positional Accuracy 0.001=36''
Surface Roundness 15 μ
Backlash 0.005 =18''
Transmission Deviation 5 μ
Parallelism 80 μ

Mechanical Drawing

 Ordering Information

Part No. Description Amount
AY110-100-01 Stepper Motor Driven Rotary Stage Click to Get a Quote
AY110-100-02 Servo Motor Driven Rotary Stage Click to Get a Quote

Related Products
Motion Controllers

Sharing link:


Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products |Site Map | Videos | Contact Us