Hollow Core Motorized Rotary Stage

Home > Motorized Rotary Stages

Hollow Core Motorized Horizontal Rotary Stage, Stage Diameter: 3.937 in (100 mm)

Stepper Motor Driven Hollow Cure Motorized Rotary Stage

Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Hollow Cure Motorized Rotary Stage

Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Hollow Core Motorized Rotary Stage

This motorized rotary stage is made of aluminum alloy with an elegant black anodized surface.

The drive mechanism is worm and worm gear. The worm gear ratio is 180:1.

It provides 360 degrees of continuous rotation.

The maximum load of this rotary table is 45 Kg.

This 100 mm diameter rotary actuator has a body weight of 1.7 Kg.

The resolution of 0.001 degrees is achieved with a 10 micro-steps per step stepper motor driver. This rotation stage is also available with a servo motor and optical encoder.

The top plate mounted indicator shows the angle of rotation.

The knob mounted on the motor allows for manual adjustment. This knob may be replaced with an optical encoder for precision position verification.

This motorized stage is capable of continuous spinning.

This stage requires a Motion Controller that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control.

Specifications

Type
AY110-100

Structure Description
Range of Travel
360 degrees

Stage Diameter 100 mm

Through Hole Diameter 30 mm

Gear Ratio 180:1

Drive Mechanism
Worm Gear

Travel Guide Bearing

Stepper Motor

Number of Steps per Revolution 200

Typical Phase Resistance 3.8 Ohms, Bi-directional

Typical Phase Current 1 Amp

DB-9 Male Connector

Pin Assignment and Description

1

+5 VDC for HOME Switch

2

Not Connected

3

Not Connected

4

Common

5

HOME Switch, Open Collector, Normally Open, Needs 1K Pull up Resistor

6 Stepper Motor Phase A+

7 Stepper Motor Phase A-

8 Stepper Motor Phase B+

9 Stepper Motor Phase B-

Base Material Aluminum Alloy

Surface Treatment Black Anodized

Load Capacity 45 kg

Weight 1.7 kg (4 lb)

Typical Accuracy

Resolution 0.001 degrees = 3.6 arcsec (10 Micro-steps per Step Motor Driver in use)

Repeatability 0.05 degrees

Maximum Speed with Stepper Motor 12 degrees per second

Maximum Speed with Servo Motor 45 degrees per second

Positional Accuracy 0.05 degrees

Repeatability +/-0.01 degrees

Stepper Motor Driven Mechanical Drawing

Mechanical Drawing of Hollow Core Motorized Horizontal Rotation Stage, Stage Diameter: 3.937 in (100 mm)

Ordering Information

Part No.	Description	Amount
AY110-100-01	Stepper Motor Driven Hollow Core Rotary Stage, Stage Diameter:100 mm, Aperture Diameter: 30 mm	Click to Get a Quote
AY110-100-02	Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Hollow Core Rotary Stage, Stage Diameter:100 mm, Aperture Diameter: 30 mm	Click to Get a Quote
AY110-100-03	DC Servo Motor with Quadrature Incremental Optical Encoder Driven Hollow Core Rotary Stage, Stage Diameter:100 mm, Aperture Diameter: 30 mm	Click to Get a Quote
AY110-100-04	Stepper Motor Driven Hollow Core Rotary Stage with 500 Cycles per Revolution Quadrature Optical Encoder Mounted at the back of the Stepper Motor, Stage Diameter:100 mm, Aperture Diameter: 30 mm	Click to Get a Quote