|
| |
|
Specifications
|
Type |
PR110-10-15 |
|
Range of Travel |
+/-10° (Roll Axis)
+/-15°
(Pitch Axis ) |
|
Table Size |
65 mm x 65 mm |
|
Gear Ratio |
1° (stage) :
352° (motor) (Roll Axis)
1° (stage) : 252° (motor) (Pitch Axis) |
|
Drive Mechanism |
Worm Gear |
|
Travel Guide |
Crossed-roller Guide |
| Stepper Motor |
|
|
|
Typical Phase Resistance
|
3.8 Ohms, Bi-directional |
| Typical Phase Current |
1 Amp |
|
DB-9 Male Connector |
|
Pin Assignment and Description |
|
1 |
+5 VDC |
|
2 |
CCW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor |
|
3 |
CW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor |
|
4 |
Common |
|
5 |
Not Connected |
|
6 |
Stepper Motor Phase A+ |
|
7 |
Stepper Motor Phase A- |
|
8 |
Stepper Motor Phase B+ |
|
9 |
Stepper Motor Phase B- |
|
|
|
Base Material |
Aluminum Alloy |
|
Surface Treatment |
Black Anodized |
|
Load Capacity |
4.5 kg |
|
Weight |
1.5 kg |
|
Maximum Speed |
10 °/sec |
|
Typical Repeatability |
+/-4‘ |
|
Typical Positional Accuracy |
+/-9‘ |
|
Typical Backlash |
+/-3‘ |
|
|
Stepper Motor Driven Mechanical Drawing
(Roll
Table)
|
|
Ordering Information
|
Part No. |
Description |
Amount |
|
PR110-10-15-01 |
Dual-axis Stepper Motor Driven Linear Pitch and Roll Stage, Table Size
65x65 mm |
Click to Get a Quote |
|
PR110-10-15-02 |
Dual-axis
Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Pitch and Roll Stage,
Table Size
65x65 mm |
Click to Get a Quote |
|
PR110-10-15-03 |
Dual-axis DC Servo Motor with Quadrature Incremental Optical Encoder Driven Pitch and Roll Stage,
Table Size
65x65 mm |
Click to Get a Quote |
|
PR110-10-15-01 |
Dual-axis Stepper Motor Driven Linear Pitch and Roll Stage, Table Size
65x65 mm |
Click to Get a Quote |
Related Products
|
